The Model C is a relatively high capacity compact mill. The rotor diameter is 18” and the grinding chamber is 14” wide. Recommended for use with main drive motors ranging from 30 HP to 75 HP, depending on the material being ground. The cover is hinged with a handle and a 4 swing bolts which allows for quick access to the grinding chamber. The Model C can be either direct drive or belt driven and the dual feed screw arrangement can be supplied in either 2-15/16” or 4” diameter.
A gravity feed model is also available and is recommended for high capacity grinding where neness of grind is no priority. In the gravity feed model, the feed material falls by gravity into the grinding chamber, where it will accept much larger lumps than the feed screw model. The Model C has three times the capacity of the Model B. This model can be set up for Cryogenic grinding to be used with one of our cooling tunnels.
All Pulva-Sizers™ are capable of wet milling feed materials and slurries.