PRODUCTS

PULVERIZERS

MODEL B PULVA-Sizer 15-25 HP

The Model B mill is equipped with a variable speed feed drive and is generally furnished complete with motors, starters, wiring and ready for operation. Recommended for use with main drive motors ranging from 10 HP to 25 HP, depending on the material being ground. The standard feed arrangement is dual feed screws of 1-3/4”, 2-1/4” or 2-15/16” diameter. The Model B hammers are available in stirrup or blade type.

The Model B is also available with either dual overhead feed screws or gravity feed. The gravity feed and overhead feed screw models Mare recommended for high capacity grinding where neness is not a priority. The Model B is our most popular production mill for capacities ranging from 1000 to 6000 pounds per hour. The Model B can also be set up for Cryogenic grinding to be used with our 7ft. cooling tunnel.

All Pulva-Sizers™ are capable of wet milling feed materials and slurries.

 
Pulverizer Product Specifications - Model B
Weight:
LBS
Type Rotor (Hammers)
Swing or Rigid
Net 1,650
Screen Area Sq. In.
118
Domestic 1,800
Air Passed (CFM)
150
Export 2,050
Hammer Tip Speed (Ft/Min)
21,000
Dimension Inches
Max Rotor Speed (RPM)
6,900
Domestic
64x60x36
Rotor Dia. (Inches)
12
Import
64x62x48
Horse Power
10-25
Hopper Capacity CU. FT(STD)
1.0
Approximate Idle Load (HP)
5